Tel: 18658287715


How to use PTFE tape
- 2019-03-30 -

The PTFE belt , the textile dyeing machine conveyor belt, the printing dryer conveyor belt, etc. are one of the conveyor belts produced by Yaxing. It is used in textile dyeing machine conveyor belt, printing dryer conveyor belt, chemical, glass, medicine, electronics, insulation, grinding wheel slicing, machinery and other main performance characteristics:

1, for low temperature -70C, high temperature 260C, with weather resistance, anti-aging.

After actual use, such as 200 days in the high temperature of 250C, not only the intensity

It won't go down, and the weight doesn't cut:

2, non-adhesive: not easy to adhere to any substance. Easy to clean all kinds of oil stains, stains or other attachments attached to its surface: almost all adhesives such as paste, resin, paint, etc.

Quality can be simply eradicated:

3, chemical corrosion resistance, the strong acid, alkali, aqua regia and various organic solvents corrosion.

4. Good dimensional stability (extension coefficient less than 5%) and high strength. Has outstanding mechanical properties.

5. Anti-bending fatigue, can be used for smaller wheel diameters. All kinds of large rollers can be installed and used.

6. Drug resistance, non-toxic. Almost all drug-resistant items, including strong acid and strong break.

7. Fire retardant. Widely used in chemical, petroleum, mining, textile, food, paper, medical, electronics and machinery industries.

8, breathable a conveyor belt of the ventilating car to reduce heat source consumption to improve dry exercise,

Application method of PTFE belt: Finishing and drying the sealing surface, selecting a PTFE belt of a certain width, tearing off the adhesive tape to protect the paper, and pressing the sealing tape against the outer edge of the sealing surface, and the ends of the two ends are interspersed at a bolt. , more than 20om beyond the insertion point Note: On the plane flange, the ends must be interspersed. It can be used in the groove flange, can be stacked in parallel, stacked more than 2en,), close the corresponding sealing surface, evenly tighten the bolts, and the piercing parts at both ends will be pressed to the same thickness as other parts. The interspersed place will never leak. The PTFE belt is clean and clean. The PTFE belt is a white PTFE product, because it will not be corroded and will not age, so it will not pollute the contacted fluid due to falling.